So it’s the time of the year where everyone is worried about freckles, bumps, acne, rashes, spots, and all other sh*t you won’t want on your body, Because the heat is driving everyone to wear fewer clothes.
If you’re also beach-crazy, then you don’t want to be caught having razor bumps and those ugly black stains that leave permanent stains on your bikini area or underarm.
This is entirely not about body-shaming, but you should actually worry about how your underarm and bikini area looks.
Lots of these stains, spots, and rashes can actually be prevented and treated for a spotless look.
If you are down here, worried about your razor bumps or you just want to prevent razor bumps or you’re searching for how to prevent razor bumps after shaving, then, you’ve landed in the right spot. Let’s go over it quickly.
What causes razor burn?
Razor bumps in many cases are caused by hair follicles trapped under the skin. These bumps result from follicles curling in on themselves and getting trapped beneath the surface of the skin and they’re known medically as pseudofolliculitis barbae. The fastest way to prevent a future reoccurrence is by shaving carefully with a fresh, sharp shaving blade.
You can develop razor burn for a number of different reasons. There isn’t anyone specific thing — such as a type of razor or shaving lubricant — to avoid.
The following can lead to razor burn:
- shaving without using a lubricant, such as soap and water or shaving cream
- shaving against the direction of your hair
- using an old razor
- using a razor that’s clogged with hair, soap, or shaving cream
- shaving a single area too many times
- shaving too quickly
- using shaving products that irritate your skin
It’s important to remember that your razor is a tool that must be maintained and replaced as needed. Even if you’re using an appropriate lubricant and shaving in the correct direction, a dull or clogged blade can cause you to develop a razor burn.
How to prevent razor bumps after shaving
Hints and tricks
- Frequently exfoliate your skin to cast off lifeless pores and skin cells.
- Before shaving, observe a lubricant, along with soap or shaving cream.
- Keep away from the temptation to pull your skin tightly whilst shaving.
- Shave in the course that the hair grows.
- Shave with light and short strokes.
- Rinse your blade frequently at some stage in the shaving system.
- After shaving, rinse your pores and skin with bloodless water or follow a chilly washcloth to close pores.
- Replace your razor or blade often.
- Attempt using an electric razor or some other safe hair elimination method.
Instructions on How to Treat Razor Bumps
- Use a chemical exfoliant that is soothing and gentle.
While it’s a good idea to use a physical scrub before shaving, you should avoid abrasion after any bumps have appeared. Instead, you should use a chemical exfoliant that is gentle on the skin. These products work gently to dissolve dead skin cells, neutralize bacteria, deflate bumps, and encourage trapped hairs to poke their way through the skin, despite the word “chemical” sounding a little aggressive.
- Take your time.
In the same way that you must resist the urge to pop a pimple, you must allow your razor bumps to heal on their own as well. And that’s a huge bummer. If you have a large number of them, many of them will clear up on their own within a few days.
- For the time being, refrain from shaving the affected area.
Regardless of where the razor bumps are located, and even if it is just a single bump, you must refrain from shaving for a period of time—at the very least until the bumps heal.
Despite the fact that this should go without saying, doing so will only aggravate the situation further. For those who need to maintain a clean appearance, you could shave around a single bump with extreme caution, but it would be wiser to use an electric shaver for this purpose. Because they don’t cause any damage to the skin’s surface, they’re a bump-free way to shave by their very nature.
- Apply warm pressure to the affected area.
Every day, you can apply a warm compress to the bumps to soothe and soften the skin while also encouraging the hair to come loose.
How to Shave Without Developing Razor Bumps
How to prevent razor bumps after shaving
1. Purchase a high-quality bikini razor.
The first step to a smooth and bump-free bikini line is to choose the proper razor. Dendy Engelman, MD, of Manhattan Dermatology and Cosmetic Surgery in New York City, believes that having more blades distributes more pressure, allowing each blade to cut with less force but greater effect. To put it another way, you’ll get a better, tighter shave without the chance of cutting yourself or causing irritation.
Single-blade stainless steel safety razors, for example, have grown popular in recent years as a way to reduce plastic waste. According to Dr. Rodney, they’re just as safe for your skin as a typical plastic razor, even on your bikini line. You can totally eliminate the hairs with only one pass. The skin is less traumatized, and the hairs are clipped bluntly, reducing the possibility of ingrown hairs,” she explains.
2. Prepare your bikini line to avoid ingrown hairs.
Spend around 10 minutes in warm water before shaving your bikini area. According to Fumi Ozaki, an esthetician and electrologist in Redondo Beach, California, this will help soften the surface layer of your skin, making it simpler to remove hair (and reducing your chances of suffering razor burn). “Pat the skin dry after the 10 minutes is complete to remove any extra water,” she advises.
Engelman recommends lightly exfoliating with a wet washcloth or a scrub after cleaning and drying your bikini line to remove dead skin cells and allow the blade to reach closer to the skin. She claims that it “teases out any stubborn ingrown hairs” before shaving.
3. Don’t forget to use shaving cream.
This shaving accessory may appear to be nothing more than a nice way to feel and smell when shaving, but it’s so much more. When you shave, you’re also shaving your skin, If you don’t use enough shaving cream to create enough glide, you’ll softly abrade your skin, irritating it.
Don’t reach for random, cheap shaving cream, just like you shouldn’t reach for that quality bikini shaver you’re intended to get. “Use a good-quality shaving gel with a brief list of moisturizing components, such as shea butter, olive oil, and coconut oil—these types of bases will provide your razor an appropriate buffer.
Only shave the region that needs to be shaved with a very thin layer so you can see the skin and hair shaft underneath.
4. Pay attention to the direction in which you shave.
People have strong feelings about whether you should shave your bikini line up or down, and the direction you shave matters. “How you shave is quite essential, particularly for people who are prone to bumps,” Bischoff adds. Cutting and ingrown hairs are more likely when you use your razor in a variety of ways. Shave in one direction only—in the direction of hair growth. Going against the grain of your hair increases the likelihood of irritation.
Maintain a downward gliding motion with your razor down the bikini line without applying too much pressure. The more blades you use, the less likely you are to have to re-shave this delicate area.
5. After shaving the bikini area, relax your skin.
To avoid irritation, wash off as soon as you set your razor down and apply a cold compress to the region for 10 minutes, according to Ozaki. To further lessen your chances of razor burn, apply an anti-redness serum (ideally fragrance-free). “I recommend tea tree oil,” says Engelman, “which is a natural anti-inflammatory and antiseptic that can help soothe razor burn.” “More powerful lotions, such as topical steroids, can be administered to relieve redness, swelling, and pain if you’ve truly irritated someone.”-SOURCE
6. Moisturize, moisturize, and moisturize some more.
After shaving, it’s critical to hydrate and moisturizes your skin. To lock in the moisture and minimize over-drying, apply an unscented, alcohol-free moisturizer to both sides of the bikini line. Look for products that contain soothing aloe vera, as well as jojoba oil and vitamin E for moisture.
Always sanitize your razor blades after each shave with rubbing alcohol and warm or hot water. Toss out your razor if it’s rusted and you’ve been using it for a while. Replace old blades—those that have been used for more than five to seven shaves.
You may also cut your losses (and avoid those red rashes) by storing blades in a clean, dry location away from the shower so they don’t take up bacteria.
8. There are other solutions if shaving irritates your skin.
Shaving isn’t necessarily the best option for everyone’s skin. If you still want to be smooth, waxing, whether done by a professional or at home, is a safe and gentle option for your skin because it eliminates the hair from the root, which means bacteria can’t get in as readily, Laser is a longer-term option for sensitive skin that eliminates the need to shave, may be right for you.
This is How to prevent razor bumps after shaving